This page is for buyers in Uzbekistan who are specifying a gas-fired boiler house — a district heating plant, a food factory, a greenhouse complex, a hotel or a hospital. It covers what has to be different when the plant is in Tashkent, Samarkand or Nukus rather than in Europe, what paperwork the import actually requires, and what we need from you to put a number on it.
Belitto is a heating system supply chain manager, not a trading company reselling whatever is in stock. Condensing boilers come from a Jiuxu facility operating under ISO 9001, heat exchange equipment from Sanming. One quality standard, one export document set, one after-sales contact across both lines. We export to more than 30 countries; this page is specific to Uzbekistan because the engineering and the certification path there are specific.
Sizing a boiler for Uzbek conditions
A boiler sized for a German project and installed outside Tashkent will not deliver what the datasheet promises, because four inputs change: design outdoor temperature, altitude, gas calorific value and water quality. None of them is exotic, but all of them have to be in the calculation before the model is chosen.
| Input | What we see in Uzbek projects | What we do with it |
|---|---|---|
| Design outdoor temperature | Around −13 °C for Tashkent, colder inland and in the north-west (Karakalpakstan), milder on the southern border | We size on the design temperature stated in your project or in the applicable building climatology norm — not on a country average |
| Altitude | Most of the country sits below 1,000 m; Tashkent is roughly 450 m, Samarkand around 700 m | Below 1,000 m no output correction is applied; above it, burner and fan settings are corrected and stated on the datasheet |
| Gas lower calorific value | Typically 36–38 MJ/m³ on the Uzbek grid | Burner is jetted and set from the figure in your gas supply contract, and the efficiency figure we quote is referenced to that value |
| Supply gas pressure | Frequently lower and less stable than European design values | Gas train and regulator chosen for the pressure you actually have; a booster is specified when the guaranteed inlet pressure is below the burner minimum |
| Make-up water hardness | Hard in many regions, which scales the primary circuit | Primary and secondary circuits separated by a plate heat exchanger, plus a water treatment recommendation in the proposal |
| Plant room footprint and access | Often an existing Soviet-era boiler house being re-equipped | Unit size chosen so it passes the door and can be moved on the existing floor; if not, the cascade is split across more, smaller units |
Send the design temperature and gas data from your project documentation and we will confirm which of these actually bind your selection — usually only two of them do.
The equipment range
Two condensing series cover the whole span from a single school boiler to a city district heating plant, and they share the same control philosophy so a plant can grow by adding units rather than by replacing them.
| Series | Output | Models | Typical use in Uzbekistan |
|---|---|---|---|
| TBLN | 60–2,800 kW | 14 | Hotels, hospitals, schools, food plants, greenhouse blocks, and the base units of a cascade |
| TBYG | 3,500–7,000 kW | 3 | District heating boiler houses, industrial parks, large process loads — one unit where a cascade of small units will not fit |
- Efficiency up to 108.9% (LHV) on TBLN, which is only reached when the return water is cold enough — a condensing boiler on a 70/50 °C circuit behaves like a conventional one, and we will say so before you buy
- NOx ≤30 mg/m³ with the low-NOx burner, relevant where a city boiler house is being re-permitted
- Siemens LMS cascade control, up to 16 units on one master controller, weather-compensated staging and lead-boiler rotation
- European components: Bekaert heat exchanger, Dungs and EBM gas and air components, Siemens and SIT controls, each with its own certificate
- 30-year design life on the pressure vessel, which is what makes a staged build sensible rather than a 10-year replacement cycle
If the load swings widely across the season — the normal case where winters are cold but shoulder seasons are mild — read cascade boiler systems: N+1 redundancy and sizing before fixing the unit count. A cascade is not automatically better; it earns its cost on load variation, outage tolerance and future expansion.
Import, certification and documents
This is where most first shipments from China to Uzbekistan go wrong, and it is worth being precise rather than reassuring.
Certification: EAC does not apply to Uzbekistan
Uzbekistan is not a member of the Eurasian Economic Union. The EAC mark under TR CU 010/2011 covers Russia, Kazakhstan, Kyrgyzstan, Armenia and Belarus — not Uzbekistan. In Uzbekistan, conformity is assessed under the national system (O'z DSt / GOST-U) by an accredited body inside the country, and the practical route is that the importer holds the certificate while the manufacturer supplies the technical file behind it.
What we can put in your hands today, on every order:
- ISO 9001 certificate for the manufacturing facility
- Factory test report for each unit — hydraulic test, combustion setting, efficiency and emissions measured on that boiler, not a generic datasheet
- CE certificates for the bought-in components (Bekaert, Dungs, EBM, Siemens, SIT)
- Technical passport, drawings, nameplate and marking data in the format the Uzbek certification body asks for
- Installation and operating manual in Russian
EAC certification for the same unit can be arranged on request where the project also serves Russia or Kazakhstan — we will not claim we hold a certificate we do not hold.
Documents and customs classification
Each shipment is declared under HS 8403 10 900 0 for the boilers and 8403 90 900 0 for parts, with commercial invoice, packing list, certificate of origin, rail waybill or bill of lading, technical passport and test report. Incoterm is quoted as FCA, CFR or DAP to your site, and the DAP route is usually the least painful for a first project because the freight, transit and unloading risk stay on our side.
Freight runs by rail through Khorgos or Alashankou and across Kazakhstan, or by road. Allow roughly three to four weeks in transit to Tashkent; we confirm the live schedule when we quote, because border congestion moves month to month.
Where these systems are used in Uzbekistan
- District heating boiler houses — replacing coal or heavy fuel oil capacity with gas condensing units, often in buildings that already exist, so footprint and access drive the unit size more than the load does
- Food processing — fruit and vegetable processing, beverages, dairy and bakery, where steam and hot water demand is continuous and an unplanned stop is a spoiled batch; here redundancy is a production requirement, not a comfort one
- Greenhouse complexes — the fastest-growing gas load in the country, with a wide day-night and seasonal swing that suits a cascade far better than a single large unit
- Hotels, hospitals, schools — combined heating and domestic hot water from one plant, with a storage tank and a plate heat exchanger separating potable water from the boiler circuit
Reference plants: what we can actually show
We have not yet delivered a plant in Uzbekistan, and this page will not borrow a local reference to look bigger than we are. The references below are in China, and they are the ones we can defend line by line.
- Application: campus space heating + domestic hot water from one shared cascade
- Stage 1 (2024): 4 × 1,400 kW — 5,600 kW
- Stage 2 (2026): + 2 × 1,400 kW — 8,400 kW, same unit size, header unchanged
- Second reference: Hebei district heating retrofit — existing boiler house re-equipped without extending the building
What we need from you
- Peak heat load in kW, and the design outdoor temperature from your project documentation
- Site city and altitude, so the output correction and the freight route are both right
- Gas lower calorific value, Wobbe index and guaranteed inlet pressure from the supply contract
- Application: space heating only, or heating plus domestic hot water (and the peak hour draw in m³)
- Design flow and return temperatures — this decides whether the condensing efficiency you are paying for is actually reachable
- Plant room dimensions, door width and lifting access
- Make-up water analysis, if available
- Whether the certificate will be arranged by you or you need our support with the technical file
With those, the answer is a technical proposal: model and unit count, redundancy table, hydraulic scheme, control sequence, document list and a budget price — normally inside 48 hours. If something is missing, we will tell you which two numbers matter and which ones we can work around.
Request a proposal for a project in Uzbekistan
Send the load, the site city and your gas data. You get unit selection, document list and a budget price within 48 hours.
Send Project DataRelated reading: Central Asia heating market: why −30 °C climate changes boiler selection · Cascade boiler systems: N+1 redundancy and sizing · TBLN and TBYG condensing boilers · Plate heat exchangers for DHW separation